If you are encountering issues with your Jio Phone keypad, such as forgetting your lock pin password or your phone running slowly, then a hard reset may be necessary. Hard resetting can be done in two ways – through the power and boot key or through the mobile setting. In this article, we will guide you through the step-by-step process of formatting your Jio Phone keypad in both situations.
Before we begin, it is important to note that “hard reset”, “factory reset”, and “format” all mean the same thing. Do not be confused by these terms, they all refer to the process of erasing all the settings and data on your phone and resetting it back to its original condition.
Method 1: Hard Reset Jio Phone Keypad using Boot Key
The first step in this method will vary depending on the model of your Jio Phone keypad. The boot key is different for each model, but we have included a table below with the boot key for each Jio Phone model, so you can easily find the one for your phone. After finding the boot key for your Jio Phone keypad, follow these steps:
Step 1: Verify the model of your Jio Phone by removing the battery and checking the label.
Step 2: Find the corresponding boot key in the table below.
Step 3: Remove the battery and then re-insert it to turn off your Jio Phone completely.
Step 4: Press and hold the boot key and power button of your Jio Phone keypad.
Step 5: Release the power button as soon as the Jio logo appears on the screen, but continue holding the boot key until the boot screen appears.
Step 6: Select the “Wipe data/Factory reset” option from the boot screen by scrolling down and then press the power button to confirm.
Step 7: Select “Yes” to confirm the data wipe and press the power button to confirm.
The process of wiping data from your Jio Phone keypad will take a few seconds. Finally, press the power button to reboot your phone. Once your Jio Phone is switched back on, all the default settings will be restored.
Method 2: Hard Reset Jio Phone Keypad through Mobile Setting
This method is useful if your Jio Phone keypad is running slowly or not performing as it should. To hard reset your Jio Phone through mobile settings, follow these steps:
Step 1: Go to “Settings” on your Jio Phone keypad.
Step 2: Select the “Device” option.
Step 3: Scroll down and select “Storage”.
Step 4: Select “Factory data reset”.
Step 5: Select “Reset Phone” and then select “Yes”.
Step 6: Your Jio Phone will now start resetting. This process can take several minutes to complete.
Boot Key for Different Models of Jio Phone
Jio Phone Model – Boot Key
JIO F90M – OK Key
F211S – 8 Button
F81E – 5 Key
F50 Y – OK Button
f61f – OK Button
F41T – 1 Key
F10 Q – Navigation up button
F101 – OK button
We hope this guide has been helpful in showing you how to hard reset your Jio Phone keypad. Follow these steps carefully and your Jio Phone will be back to its original state in no time!
